Difference between revisions of "T4S Connection to L1 Model I"
m (format images) |
m |
||
| Line 2: | Line 2: | ||
You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a T1®. You'll need a [[T1 ToneMatch® Audio Engine power supply|ToneMatch Power Supply]] | You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a T1®. You'll need a [[T1 ToneMatch® Audio Engine power supply|ToneMatch Power Supply]] | ||
| − | There's a slight difference because there are two 1/4 inch ( | + | There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs. |
You've got two ways to handle this: | You've got two ways to handle this: | ||
Revision as of 03:54, 22 February 2019
You can connect the T4S ToneMatch mixer to the L1 Classic or L1 Model I, just as you would a T1®. You'll need a ToneMatch Power Supply
There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs.
You've got two ways to handle this:
- Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)
OR - Leave your inputs panned to center (the default setting), and connect
- T4S Left output to the L1® Classic Channel 3
try setting the level to about 4 - T4S Right output to the L1® Classic Channel 4
try setting the level to about 4
- T4S Left output to the L1® Classic Channel 3
When using a T1® or T4S with the L1® Classic, you don't need to use the R1 Remote.