View source for Boss RC-30 Loop Station

__TOC__

== Connections to a Compact ==
You could run your inputs to the Boss RC-30 Loop station and the output to Compact Channel 2 BUT, but you will miss out on the Preset.

More on this soon.


== Connections to a Model I or Classic ==
The INSERT point works really well with my Boss RC-30 Loop Station.

I used a regular insert cable with the connections this way: 
* I ran my input (in this case a microphone) into Model I (or Classic) Power Stand Channel 1

* Using a standard insert cable 

[[Image:HosaSTP204.png]]


I made the connections this way.
* Tip to Loop Station Output
* Ring to Loop Station Input


[[Image:RC-30InsertModelI.png]] 

[[Image:Model I Insert Point.png]]

== Connections to a Model II with T1==

* T1® connected as usual using the ToneMatch® port to the Model II Power Stand
* T1® ¼ inch jack Master Output to the Boss RC-30
* Boss RC-30 output to Model II Power Stand Analog input.

This lets me do whatever I want on the T1® to create a loop track using all the processing of the T1® in front of it, and control the volume, balance, and effects of the looper separate from the T1® (direct to the Model II Power Stand) if I want to do that. The only thing that I don't think I can do gracefully, is a fade out the looper with the T1®.

----
[[Category:Insert]]
[[Category:Classic]]
[[Category:Model I]]
[[Category:Boss RC-30]]
[[Category:Boss]]