View source for Kemper Export/Import Performances


You can export/import Rigs and Presets using a USB key. To transfer a Performance, use Rig Manager - at both ends. 

;Note: Ensure both source and target Kemper Profilers are running the same version of the Kemper Operating System. If they aren't, the target Profiler may not support features in the Performance.


;Export a Performance in Rig Manager using Windows (I don't have a Mac, but this should be similar)

#Navigate to All Performances | My Profiler
#Right-Click the Performance you want to Export
#Choose Export (Ctrl-E)
#Select the Destination (Your USB Key)
#*It will have a file extension .kperformance


;Import a Performance using Rig Manager

#Navigate to All Performances | My Profiler
#Open a new window in Windows File Manager
#Navigate to the USB key
#Find the Performance you want to Import
#Use the mouse to drag the Performance
#*From the File Manager Window
#*To the Rig Manager All Performances | My Profiler into one of the New Performance locations.

The Performance should be available in the Profiler.
#Set the Profiler to Performance Mode
#In Rig Manager, select the Performance, then Ctrl-Enter to load it.
#Save the Performance to the Profiler
#*In Rig Manager, click '''Store Performance''' in #__ (the Performance slot)<br>OR<br>On the Profiler, Press the Store Button 3 times to make sure it's stored.





----

[[Category:Kemper]]