Template:T8S Pan Aux: Difference between revisions
m (update Pan Aux 4.jpg) |
m (updated introduction) |
||
| Line 1: | Line 1: | ||
{{T4S T8S icon}} | {{T4S T8S icon}} | ||
This is an overview of using the Aux Outputs on the T4S and T8S ToneMatch® mixers | This is an overview of using the Aux Outputs on the T4S and T8S ToneMatch® mixers. You can use the Aux outputs for monitors, remote speakers, or recording. | ||
Revision as of 16:54, 28 February 2018
This is an overview of using the Aux Outputs on the T4S and T8S ToneMatch® mixers. You can use the Aux outputs for monitors, remote speakers, or recording.
Select a Channel you want to direct to one of the Aux outputs. In the image below the Channel 1 CH Edit button is selected.
Turn the Rotary Selector to PAN/AUX
Turn the left most button under the display Menu to see your options. You can choose Pan, Aux Input, or one of the Aux Outputs
This is how it looks on the T8S when you turn the menu far enough to see all four Aux Outputs
In this picture we have chosen to direct Channel 1 to Aux 1. The level is 50% and the Tap is set to Pre
In this picture, Aux 1 is selected and you can choose if you want the Tap point to be Dry, Pre, or Post
