Effects/Fostex/DE-1: Difference between revisions
Jump to navigation
Jump to search
(first ed) |
m (formatting) |
||
| Line 7: | Line 7: | ||
<big>''' Fostex DE-1 '''</big> | <big>''' Fostex DE-1 '''</big> | ||
=== Connections at the {{PS1}} === | |||
Serial Effects - Excerpt from the PS1 Powerstand Manual | Serial Effects - Excerpt from the PS1 Powerstand Manual | ||
http://bose.infopop.cc/eve/forums/a/ga/ul/1411053732/inlineimg/Y/effectsSerial%5B1%5D.gif | http://bose.infopop.cc/eve/forums/a/ga/ul/1411053732/inlineimg/Y/effectsSerial%5B1%5D.gif | ||
=== Insert Cable === | |||
How the Insert Cable is wired | How the Insert Cable is wired | ||
Revision as of 11:10, 18 December 2006
Fostex DE-1
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Powerstand Manual
Insert Cable
How the Insert Cable is wired
Links
Connections at the Fostex DE-1
Excerpt from the Fostex DE-1 Manual Page 14
Controlling the Wet/Dry Mix
Excerpt from the Fostex DE-1 Manual Page 14
It seems that with the Fostex DE-1 you can use two channels when you operate in "stereo" mode. These illustrations are based on using Channel One on the Fostex unit.
Note - If you want to use both channels you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).