S1 Pro Amber Light on Channel 1

From Bose Portable PA Encyclopedia
Jump to navigation Jump to search

If you see an amber light on S1 Pro System Channel one you need to reset the Digital Signal Processor.

S1 Pro System System Reset
  1. Turn off the S1 Pro System
  2. Disconnect everything (audio, USB connections, Power)
  3. Remove the battery [1]
  4. Wait 30 seconds
  5. Reinstall the battery[1]
  6. Reconnect (audio, USB, Power)
  7. Turn on the power
  1. ↑ 1.0 1.1 Remove or Install the battery

    The screw heads are Phillips. Note: The screws remain attached to the battery cover. You can't misplace or lose them because they don't separate from the battery cover.
Retrieved from "https://toonz.ca/bose/wiki/index.php?title=S1_Pro_Amber_Light_on_Channel_1&oldid=21448"