Difference between revisions of "Phase Cancellation and the L1"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 1: Line 1:
<!-- TODO Chris please expand -->
+
<!-- TODO Chris please expand -->  
 +
 
 
== Practical Note  ==
 
== Practical Note  ==
Phase cancellation can be an issue if you are running [[Dual Mono]] (two L1®s from the same mono source). This can be an issue when '''two or more L1®s are fed the same signal'''.
+
Phase cancellation can be an issue if you are running [[Dual Mono]] (two L1®s from the same mono source). This can be an issue when '''two or more L1®s are fed the same signal'''.  
  
'''The minimum recommended distance for to {{L1 nl}}s is 20-50 feet.'''
+
'''The minimum recommended distance for to {{L1 nl}}s is 20-50 feet.'''  
  
"Interference between line arrays would be more severe [than for non-line-array speakers]. In fact, the current Bose design rules for installing MA12 line arrays recommend ... a spacing between line arrays of between 6 and 15 meters! (20-50 feet)" The same applies to the L1. - Chris-at-Bose <ref>See: http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/5941073123?r=1981053533#1981053533 in fckLR{{Forum}}</ref> (Clarifications added by the author of the quote.)  
+
'''Only when fed the same signal''', "Interference between line arrays would be more severe [than for non-line-array speakers]. In fact, the current Bose design rules for installing MA12 line arrays recommend ... a spacing between line arrays of between 6 and 15 meters! (20-50 feet)" The same applies to the L1. - Chris-at-Bose <ref>See: http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/5941073123?r=1981053533#1981053533 in fckLR{{Forum}}</ref> (Clarifications added by the author of the quote.)  
  
 
<br> Note: During a conversation with Chris-at-Bose, he confirmed that the recommendations above are the same for the {{Model II}}. [[User:ST|ST]] 15:13, 30 August 2007 (GMT-7)  
 
<br> Note: During a conversation with Chris-at-Bose, he confirmed that the recommendations above are the same for the {{Model II}}. [[User:ST|ST]] 15:13, 30 August 2007 (GMT-7)  
Line 11: Line 12:
 
<noinclude>
 
<noinclude>
 
----
 
----
<references></references>
+
<references />
  
 
[[Category:Phase]]
 
[[Category:Phase]]
 
</noinclude>
 
</noinclude>

Revision as of 09:15, 6 December 2008


Practical Note

Phase cancellation can be an issue if you are running Dual Mono (two L1®s from the same mono source). This can be an issue when two or more L1®s are fed the same signal.

The minimum recommended distance for to L1®s is 20-50 feet.

Only when fed the same signal, "Interference between line arrays would be more severe [than for non-line-array speakers]. In fact, the current Bose design rules for installing MA12 line arrays recommend ... a spacing between line arrays of between 6 and 15 meters! (20-50 feet)" The same applies to the L1. - Chris-at-Bose [1] (Clarifications added by the author of the quote.)


Note: During a conversation with Chris-at-Bose, he confirmed that the recommendations above are the same for the L1 Model II. ST 15:13, 30 August 2007 (GMT-7)