Presets 2 Upgrade instructions

Classic

L1 Model I

Download Presets 2.0 and Firmware 1.84 zip file.

NOTE: The upgrade procedure listed here may not be for all owners. Owners must be comfortable with the use of a multimedia-equipped personal computer and a DVD player. For software update troubleshooting, please visit the troubleshooting page or call the Live Music Product & Technical Support Team at (877)335-2673. END-USER LICENSE AGREEMENT IMPORTANT! READ CAREFULLY This End-User Agreement (EULA) is a legal agreement between you, the End User, and Bose Corp. governing the use of the downloadable upgrade software. By downloading the Software and loading the Software, you agree to be bound by the terms of this EULA. Copyright laws and international copyright treaties, as well as other intellectual properly laws and treaties protect this Software. The Software is licensed, not sold. This EULA grants you the right to install and use a copy of the Software on one or more Bose® PS1 power stands. You may NOT transfer, lend, distribute, prepare derivative work, reverse engineer, decompile, or disassemble the Software, except and only to the extent that applicable law expressly permits such activity. EXCEPT AS EXPRESSED SET FORTH HEREIN, BOSE, ITS SUPPLIERS, AND ITS LICENSORS HEREBY DISCLAIM ALL WARRANTIESM EXPRESS, IMPLIED, AND STATUTORY, IN CONNECTION WITH THE SOFTWARE, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OF THIRD PARTY RIGHTS, AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL BOSE, ITS SUPPLIERS, OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE.

Step 1: Download

1. Download Presets 2.0 and Firmware 1.84 (same as one linked above) and save it locally on your hard drive where you can find it easily after the download is complete.
2. . Find the update file package and extract (un-ZIP) the package. Inside the ZIP file you will find two separate .wav files and a PDF file of these same instructions.

Step 2: Burn

1. Using a CD-writing application installed on your CD-writing capable personal computer, burn the two wav files each as separate AUDIO-encoded discs. If given the options, burn with the Finalize (or Disc-at-Once) option enabled. Turn off any normalize function that the software may offer.
2. Burn the file firmware1p84.wav to CD #1 as an AUDIO CD. Label the disc CD #1 DSP Software Update 1.84 .
3. Burn the file presets2p0.wav to CD #2 as an AUDIO CD. Label the disc CD #2 Presets 2.0 Update.

Step 3: Connect

NOTE: Check the coaxial digital audio output settings of your DVD player before beginning. Turn off any 3D, normalization, spatialization, and compression features that the DVD player may have. Ensure that "bitstream" is selected in the menu setting for the digital audio output format.

1. Access the rear of the compatible DVD player and connect the audio patch cable to the DVD player’s coaxial digital audio output connector. If the player only has an optical digital audio output, a optical to coaxial converter must be used.
2. Connect the other end of the audio patch cable to the Data IN jack (RCA-type jack with a white center) of the PS1 power stand.

Step 4: Update the Firmware

NOTE: The upgrade procedure must be done in the following order with the DSP firmware update followed by the preset upgrade. The PS1 power stand may not accept the preset upgrade if the DSP firmware upgrade was not performed successfully first.

1. Turn the Power switch on the PS1 power stand to Off .
2. Insert the CD #1 DSP Software Update 1.84 disc into the DVD player. Press the STOP button twice.
3. Turn the Power switch on the PS1 power stand to On . Wait for the Power LED on the PS1 to go steady green.
4. Press PLAY on the DVD player.
5. Watch and wait. After about 8 seconds the Power LED on the PS1 will blink rapidly green (about 10 times per second). The PS1 is receiving upgrade information. This normally lasts for about 10 seconds.
6. Soon after, the Power LED should blink green at a slower rate (about twice per second). This would indicate that this first part of the upgrade was successful. If you are getting other results please visit the troubleshooting section.
7. Press STOP on the DVD player.

Step 5: Upgrade the Presets

1. Turn the Power switch on the PS1 power stand to Off .
2. Insert the CD #2 Presets 2.0 Update disc into the DVD player. Press the STOP button twice.
3. Turn the Power switch on the PS1 power stand to On . Wait for the Power LED on the PS1 to go steady green.
4. Press PLAY on the DVD player.
5. Watch and wait. After about 8 seconds the Power LED on the PS1 will blink rapidly green (about 10 times per second). The PS1 is receiving upgrade information. This normally lasts for about 10 seconds.
6. Soon after, the Power LED should blink green at a slower rate (about twice per second). This would indicate that the upgrade was successful. If you are getting other results please visit the troubleshooting section.
7. Press STOP on the DVD player.
8. Turn the Power switch on the PS1 power stand to Off .
9. Unplug the digital audio cable from the DVD player and PS1 power stand.
10. Turn the Power switch on the PS1 power stand to On. Check for a green steady Power LED on the power stand. If you are getting other results please visit the troubleshooting section.

Congratulations and enjoy the new capabilities loaded into your system. Please visit the Musicians Message Boards and share your experiences with the product!

If you had difficulty applying this update, please visit the troubleshooting section or contact the Live Music Product & Technical Support Team at (877) 335-2673 for assistance.

---