Difference between revisions of "Presets 3.0 Upgrade Instructions"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (first ed)
 
m
Line 1: Line 1:
 
{{Classic icon}}{{Model I icon}}
 
{{Classic icon}}{{Model I icon}}
 +
 +
'''Announcement from Neil-at-Bose''' November 24, 2007
  
 
Attention DJ’s using the {{Model I}} system,
 
Attention DJ’s using the {{Model I}} system,

Revision as of 13:00, 29 November 2007

Classic This information is applicable to the L1® Classic
L1 Model I This information is applicable to the L1 Model I

Announcement from Neil-at-Bose November 24, 2007

Attention DJ’s using the L1 Model I system,

We recently identified an isolated issue that only affects DJ’s that are using Preset #58 (High Volume Pre Recorded Music) on the L1™ model I system.

It was discovered that L1™ model I power stands with a serial number less than 042829Z72550001AC did not accurately contain the advertised preset #58. This preset is specifically intended for DJ’s playing pre recorded music at higher volume levels. Instead it contained a flat EQ setting which is identical to selecting preset 00.

If you do not intend to use this preset than there is no need to be concerned with this message. All other system presets have been verified and their contents are accurate.

To immediately correct this situation we are making an updated L1™ model I Preset version 3.0 available for download on our online forum. Again as a reminder there is no need to update your system if you do not intend on using this preset.

We would like to apologize for any inconvenience that this may have caused and take the opportunity to thank you for bringing this to our attention. Additionally we are excited that the “Just for DJ’s” forum is consistently among the most popular areas of our online community.

Thank you for your support.

Download the Preset 3.0 Update Patch