Difference between revisions of "T1® No Sound"
m |
m |
||
| Line 1: | Line 1: | ||
If you have no sound coming through your {{T1}}. | If you have no sound coming through your {{T1}}. | ||
| + | === Check Inputs === | ||
If you are using 1/4 inch inputs make sure that you are using the inputs in the top row (in the center of the XLR/Combo inputs). NOT the Preamp Outputs in the bottom row. | If you are using 1/4 inch inputs make sure that you are using the inputs in the top row (in the center of the XLR/Combo inputs). NOT the Preamp Outputs in the bottom row. | ||
[[Image:T1_Inputs_Not_Preamp_Outputs.png]] | [[Image:T1_Inputs_Not_Preamp_Outputs.png]] | ||
| + | |||
| + | === Check Input Levels === | ||
| + | |||
| + | [[Image:T1 Prefs Input Level.png]] | ||
| + | |||
| + | === Check Channel Mute Buttons === | ||
| + | Make sure that the Channel Mute buttons are NOT lit. | ||
| + | |||
| + | |||
| + | === Check Output Levels === | ||
| + | |||
| + | [[Image:T1 Prefs Output Level.png]] | ||
---- | ---- | ||
[[Category:T1]] | [[Category:T1]] | ||
Revision as of 04:40, 29 March 2015
If you have no sound coming through your T1 ToneMatch Audio Engine.
Check Inputs
If you are using 1/4 inch inputs make sure that you are using the inputs in the top row (in the center of the XLR/Combo inputs). NOT the Preamp Outputs in the bottom row.
Check Input Levels
Check Channel Mute Buttons
Make sure that the Channel Mute buttons are NOT lit.
Check Output Levels
