Template:Monitor Placement

From Bose Portable PA Encyclopedia
Revision as of 21:45, 23 February 2026 by ST (talk | contribs) (Created page with "If you are using stage monitors, be sure to place them so they are directing sound at the area of the microphone that rejects the most sound. Note from [https://www.shure.es/...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If you are using stage monitors, be sure to place them so they are directing sound at the area of the microphone that rejects the most sound.

Note from Shure.com

Other variants on the unidirectional polar pattern include supercardioid and hypercardioid options. Both patterns offer narrower front pickup angles than the cardioid – 115 degrees for the supercardioid and 105 degrees for the hypercardioid – alongside greater rejection of ambient sound. Additionally, while the cardioid is least sensitive at the rear (180 degrees off-axis), the supercardioid is least sensitive at 125 degrees and the hypercardioid at 110 degrees. When placed properly they can provide more 'focused' pickup than the cardioid pattern, but they also have less rejection at the rear. If you're using either of these polar patterns on stage with wedge monitors, it's important make sure you avoid placing the wedges directly behind the mic in this instance. Instead, place them either side at the mics least sensitive angle.

Microphone Polar Patterns and Monitor Placement.jpg