Template:Glossary L1 Pro

This is an alphabetized glossary of technical terms used in Bose L1 Pro articles.

Glossary

Array (Line Array)

A vertical stack of small speakers working together to project sound evenly across distances. Wikipedia

Bluetooth Streaming

Wireless audio transmission from mobile devices to the speaker system. Technical Data Sheets

Bose App

Formerly the L1 Mix App, now used to control mixer settings, EQ, and presets wirelessly. Bose Music App

Cardioid Configuration

Subwoofer setup that directs bass forward and cancels it behind—ideal for stage control. Cardioid Mode

Coverage Pattern

The angle and shape in which sound spreads—Bose arrays offer 180° horizontal coverage. Comparing_L1_Pro_Models

Coupling (Subwoofer)

Positioning multiple subs close together to reinforce bass output through acoustic synergy. Sub_Comparison

Elevated Stage

Performance platform higher than the audience; affects speaker placement and vertical sound dispersion. Reference

Feedback

High-pitched squeal caused by audio looping between microphone and speaker. Microphone Feedback

Frequency Response

The range of sound frequencies a speaker can reproduce, typically in Hz. Technical Data Sheets

Mono / Stereo Sound

Mono uses a single channel; stereo splits audio into left/right channels for spatial depth. Reference

Onboard Mixer

Built-in mixing console with inputs for microphones, instruments, and Bluetooth audio. Reference

RaceTrack Subwoofer

A slim, rectangular subwoofer design by Bose that delivers deep bass in a compact form. Sub Comparison

SPL (Sound Pressure Level)

Measurement of loudness in decibels (dB). Higher SPL = louder output. Reference

Throw Distance

How far sound travels effectively before losing clarity or volume. Throw Over Distance

ToneMatch Presets

EQ presets designed by Bose to optimize sound for specific instruments and vocals. ToneMatch Mixers

Venue Depth

Measurement from the stage to the back of a room, important for estimating needed projection. Reference

Footnotes for Bose L1 Pro articles in alphabetical order. Include with {{Footnotes_L1_Pro}}

Footnotes

1. Bose systems output mono sound unless using dual setups for stereo imaging. Reference

1. Cardioid bass configurations require Sub1 or Sub2 units with specific placement and settings. Sub Comparison

1. Feedback risk increases with improper mic placement or excessive gain—especially on reflective surfaces. Shure

1. “Throw” refers to how far a speaker’s sound can project before losing definition or volume. Throw Over Distance

1. RaceTrack subwoofers deliver performance comparable to larger round subs, but in a space-saving form. Sub Comparison

1. Stereo setups with two L1 Pro8s or S1 Pro+ units enhance spatial depth but require careful panning and positioning. Reference

1. ToneMatch processors (like the T4S or T8S) offer advanced mixing and are compatible with all L1 Pro systems. ToneMatch Mixers

1. All L1 Pro systems feature three onboard mixer channels. Channels 1 & 2 support ToneMatch presets and reverb. Reference