Search results
Create the page "Line 6" on this wiki! See also the search results found.
Page title matches
- |RightHead = Connect a Line 6 Helix to an L1 Pro ;Question How do I connect a Line 6 Helix to an L1 Pro3 KB (516 words) - 01:51, 5 January 2023
Page text matches
- With the master at zero, set the respective channel gain to 6. At this point, the LED on the remote will be at the same intensity as the ...annel. These channels don't have indicator LEDs, but are designed for 0 dB line-level signals (e.g., from an effects device, mixer or MP3 player). Use the60 KB (9,859 words) - 05:33, 26 March 2017
- |RightHead = Connect a Line 6 Helix to an L1 Pro ;Question How do I connect a Line 6 Helix to an L1 Pro3 KB (516 words) - 01:51, 5 January 2023
- * All XLR outputs are balanced, line-level * All 1/4-inch outputs are unbalanced, line-level5 KB (706 words) - 01:49, 5 January 2023
- Articulated line array loudspeaker technology produces wide, uniform sound coverage througho ===== Convex arrangement of 6 speaker array =====27 KB (4,306 words) - 01:35, 20 May 2021
- ...stem via a simple digital connection. It offers three mic/line inputs, two line inputs (L/R), our largest library of ToneMatch presets, proprietary zEQ and === Are there similarities between the L1™ Model II system and line arrays currently in use? ===42 KB (6,832 words) - 05:25, 26 March 2017
- {{Bass Line Out ==Bass Line Out and B1 behavior ==5 KB (854 words) - 05:26, 26 March 2017
- If there is no B1 and nothing connected to the Bass Line Out. The L1 sees frequencies from 110Hz up. Feeding it anything lower, does ==== Bass Line Out and B1 behavior ====7 KB (1,241 words) - 00:41, 28 June 2018
- Sept 2021 [https://www.kemper-amps.com/products/profiler/line-up Profiler PowerRack] with Kemper Kabinet * Use the Page buttons to navigate to page [6/6]24 KB (3,721 words) - 12:54, 8 August 2023
- [[File:S1 Pro Line Out.jpg|400px|right|S1 Pro system Line Out]] ; Connect the Line Out from an {{S1}} to the input of another device.3 KB (500 words) - 22:20, 16 November 2019
- ...ne controls, and Reverb). The third channel can receive Bluetooth audio or line-level inputs. Both units can be controlled using the Bose Music App, and yo ...projection over distance is greater with the L1 Pro32. This is because the line array is twice as long (32 drivers) and powered by 480 watts RMS. The L1 Pr15 KB (2,619 words) - 15:00, 31 October 2023
- * Dates: May 4, 5, 6 (Sunday, Monday, Tuesday) [http://bose.infopop.cc/eve/forums/a/tpc/f/292105355/m/6071077125/p/6 Discussion turns to the Geneva Hall] in the message board.19 KB (3,088 words) - 18:40, 26 March 2017
- <td>One 6" (152 mm) low-frequency driver mounted behind the three driver in a curved <li>6.5 kg (14.3 lbs) – Without Battery</li>6 KB (861 words) - 01:41, 7 March 2022
- ** T8S: Channels 1, 2, 3, 4, 5, 6, 7 and 8 all have combo XLR-1/4" inputs ** T4S: Aux Channels 5 and 6 are 1/4" Tip-Ring-Sleeve3 KB (453 words) - 01:38, 17 May 2021
- ...for line level sources and do not have the same gain staging as channels 5/6 (9/10 for the {{T8S}}). * (6) User Scenes: User-definable scenes for saving and recalling all your favo9 KB (1,484 words) - 23:55, 13 December 2023
- <li>Mid-High array and extension: 6.1 kg (13.5 lb) </li> <td>201.2 X 35.5 X 45.6 cm12 KB (941 words) - 15:01, 12 June 2021
- <li>Mid-High array and extension: 6.1 kg (13.5 lb) </li> <li>Mid-High arrays (2) 7.1 kg (15.6 lb)</li>13 KB (1,143 words) - 16:24, 23 September 2023
- ;What ToneMatch Presets should I use with my Guitar Modeler (AXE FX, Line 6, Kemper, or similar)? EQ developed by Line 6 and Bose to work with the original Line 6 POD1 KB (232 words) - 13:20, 22 September 2018
- ...20G10S%20Quick%20Start%20Guide%20-%20English%20.pdf" class="postlink">Line 6 G10S Manual</a><br> The Line 6 Relay G10S (G10T plus pedalboard style base unit) works the same way.<br>3 KB (527 words) - 16:39, 19 February 2021
- <li>Mid-High array and extension: 6.1 kg (13.5 lb) </li> <td>201.2 X 35.5 X 45.6 cm11 KB (856 words) - 21:13, 11 June 2021
- ...tone excellence. Actodyne General Inc. has teamed up with John to create a line of amplifiers based on his original "Bluesmaker" series. Designed for the g ...configuration. A tube-driven stereo effects loop lets you place effects in-line between the preamp and power amp for sonic effects that can't be obtained a34 KB (5,610 words) - 15:00, 18 January 2021
- ...for line level sources and do not have the same gain staging as channels 5/6 (9/10 for the {{T8S}}). ...g an impact on feedback. Each halving of distance is approximately another 6 dB of [[Gain Before Feedback|gain before feedback]]. This relationship in p16 KB (2,433 words) - 20:03, 1 July 2023
- <li>Power Stand: 11.2 kg (24.6 lb)</li> <li>Line Level (flat)</li>7 KB (1,045 words) - 15:04, 12 June 2021
- ...arcus Ryle — Co-founder & Vice President of Product Development Line 6 Incorporated, <br />Kenneth Jacob — Chief Engineer & Director Bose Li ...applicable in that context. Please be aware that the {{L1}} is a portable line array. It is twice the height of the MA12 and has different characteristics4 KB (651 words) - 13:44, 29 March 2017
- === Convert Cat-5/6/7/8 to Ethercon === ...o run the {{T1}} off of the optional power supply, and then run a balanced line from the Master Out on the {{T1}} to the balanced 'analog input' on the {{M5 KB (805 words) - 19:12, 6 June 2021
- The {{T1}} Aux Out is a 1/4 inch (6 mm) Tip-Ring-Sleeve balanced mono output and it is suitable to connect to t ...-Sleeve cable will have up to -6dB lower signal and be more susceptible to line noise.659 bytes (111 words) - 22:19, 16 November 2019
- ...VE=8 to the {{S1}}. This should be fine for connections up to twenty feet (6 meters). For other scenarios like those listed below, please see the [https # You won't use the S1 Pro Line Out.2 KB (248 words) - 22:21, 16 November 2019
- <li>Mid-High arrays (2) 7.1 kg (15.6 lb)</li> 213.5 × 34.5 × 55 cm (84.1 × 13.6 × 21.7 in)<br />11 KB (979 words) - 16:27, 23 September 2023
- *AF Out 6 dB | Gain 39 dB AF Out 6 dB | Gain 39 dB5 KB (897 words) - 14:39, 13 April 2022
- ...into a big obstacle, because then the sound can't get out; leave at least 6 inches (15 cm) of space in front of the grille. The side of the box itself ...n face to face, leaving 12 inches (30 cm) between grilles (because this is 6 inches (15 cm) in front of each B1). Sonically, it doesn't matter which wid10 KB (1,856 words) - 20:49, 13 July 2021
- ...ith Tip-Ring-Sleeve plugs]][[File:14 to xlr male.jpg|thumb|100px|1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR]][[File:14 insert.jpg|thumb|100px|Insert cable *1/4 inch (6.3 mm) Tip-Ring-Sleeve8 KB (1,267 words) - 17:43, 7 February 2023
- ...-Sleeve cable will have up to -6dB lower signal and be more susceptible to line noise. ...d mono intended to be connected to the balanced input of another device at line-level. This may also work with headphones but the volume will be very low a5 KB (923 words) - 20:02, 9 July 2018
- [[File:Line 6 Helix.png|link=https://line6.com/helix/|x200px|Line 6 Helix]] ...act}} use Channel 2 ¼ inch jack with the ToneMatch switch set to ''Line''.5 KB (762 words) - 12:12, 1 November 2019
- :Line-level analog input accepts 1/4" TRS phone cable. Can be used for instrument *Bass line out9 KB (1,440 words) - 01:37, 20 May 2021
- ...ttp://toonz.ca/bose/wiki/images/c/c3/Faq_L1_Model1S.pdf Model 1S FAQs page 6]</ref> ...1s connected to the Bass Module Output AND something connected to the Base Line Out.7 KB (1,259 words) - 08:44, 26 March 2017
- ...ce a special year end concert at Bose headquarters Monday, December 20, at 6:00 PM. ...ee pound class D amplifier connects seamlessly to an L1® Power Stand Bass Line out and powers up to two B1s.21 KB (2,953 words) - 18:18, 16 October 2022
- ...rophone cable by a mixer equipped with phantom power or by some type of in-line external source. The voltage is equal on Pin 2 and Pin 3 of a typical balan ** {{T8S}} channels 1, 2, 3, 4, 5, 6, 7, 88 KB (1,252 words) - 19:43, 10 March 2020
- ...e compressor shuts off, there may be an excess of energy going through the line causing a significant spike in voltage going to the {{L1}}. Conversely, whe • Numark RM-6 mixer6 KB (872 words) - 17:51, 21 August 2021
- ...able, but you will lose up to -6 dB in signal strength and you may pick up line noise.1 KB (186 words) - 11:48, 30 August 2018
- ...edals on the market or use a DSP-based amplifier modeler, such as the Line 6 "Pod" that models the tone produced by amplifier tubes, guitar transducers ...must use a load device, such as a "Plate Soak" or a "Hot Plate" to give a line-level output suitable for the input stage of the T1.31 KB (4,908 words) - 04:28, 9 April 2017
- *[[Dual Mono]] - keep the L1s 20 feet (6 meters) apart or more ...rly the Model I and the Model II. Because the I and II are essentially 14' line arrays (7' speaker with a 7' mirror image source created by the floor refle8 KB (1,432 words) - 15:37, 23 September 2023
- The L1 Pro8 is 6 dB louder than the L1 Compact. That will make a difference in a noisy venue === Bottom Line ===5 KB (829 words) - 18:18, 30 November 2021
- ...m way back in August 2004 after having owned the System for all of perhaps 6 weeks. ...drum kit, somebody standing within 2-3 feet of a System - directly in your line of sight).3 KB (612 words) - 18:10, 26 March 2017
- <html><meta name="description" content="The Bose® L1® Model 1S Portable Line Array"></meta></html> :Line-level analog input accepts 1/4" TRS phone cable. Can be used for instrument8 KB (1,264 words) - 01:56, 20 May 2021
- ...r example, two background singers standing shoulder to shoulder, or a horn line. ...eep it handy (especially for people unfamiliar with the system). This is a 6 page pdf document, that you can print and leave at any venue that provides12 KB (2,071 words) - 02:57, 26 March 2017
- {{Please leave this line alone and write below (this is the coloured heading)}} ...robably don't want no matter what. One possible exception to this is, say, 6" thick concrete with a 1/4" thick lining of steel. Oh, and don't take my wo9 KB (1,320 words) - 05:36, 25 November 2018
- * Line 6 Bass PodXT w/cables / The Jester4 KB (568 words) - 18:35, 26 March 2017
- *If you have a balanced line source and TRS cable, and plug into an unbalanced input (1,2,3), you may no 5 foot of cord from the T1 to the switching power supply, and a removable 6 foot cord from the power supply to the wall. This is very similar to a lapt13 KB (1,983 words) - 11:55, 22 May 2018
- ...if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss.3 KB (394 words) - 22:20, 16 November 2019
- ...ose recommends that the {{Compact}} systems are at least 15-20 feet apart (6 meters). ...sure you are using a balanced cable between the two L1 Compacts (1/4 inch (6.3 mm) Tip-Ring-Sleeve)2 KB (401 words) - 23:50, 1 January 2023
- ...p?title=File:Compact_Channel_2_Line_Level.png"><img alt="Compact Channel 2 Line Level.png" height="412" src="http://toonz.ca/bose/wiki/images/a/a3/Compact_ ...if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss.</p>3 KB (534 words) - 17:10, 6 April 2017
- ...able, but you will lose up to -6 dB in signal strength and you may pick up line noise.1 KB (182 words) - 12:02, 23 February 2019
- ...S}} , but you will lose up to -6 dB in signal strength and you may pick up line noise.3 KB (433 words) - 22:23, 16 November 2019
- ...interest, the B1 bass module has two 5.25 inch drivers. The S1 Pro has one 6 inch driver. :The {{S1}} Line Out is full range. Using this to provide a full range signal the {{A1}} to2 KB (308 words) - 15:44, 19 May 2022
- The {{T1}} Master Out is a 1/4 inch (6.3 mm) Tip-Ring-Sleeve balanced mono output and it is suitable to connect to ...-Sleeve cable will have up to -6dB lower signal and be more susceptible to line noise.831 bytes (134 words) - 22:25, 16 November 2019
- ...S}} , but you will lose up to -6 dB in signal strength and you may pick up line noise.2 KB (357 words) - 22:23, 16 November 2019
- ...not a Sub2. Instead, I connected an L1 Pro 16 power stand to the L1 Pro32 line out to simulate adding a Sub2. Then I cranked up the volume on everything. :The math: If you run a Sub2 and add another Sub2, you can expect up to +6 dB SPL. You get +3 dB from doubling the power and up to +3 dB by doubling o3 KB (508 words) - 23:20, 19 April 2021
- ...reset for many things. You might like it a lot if you intend to use a Line-6 Pod, other modeling device or one of a universe of distortion pedals. Alway16 KB (2,852 words) - 09:17, 25 March 2024