Search results

Create the page "Line 6" on this wiki! See also the search results found.

• Feedback / Microphone
  ...for line level sources and do not have the same gain staging as channels 5/6 (9/10 for the {{T8S}}). ...g an impact on feedback. Each halving of distance is approximately another 6 dB of [[Gain Before Feedback|gain before feedback]]. This relationship in p
  16 KB (2,433 words) - 20:03, 1 July 2023
• Bose L1 Pro8 Compared to L1 Compact
  <li>Power Stand: 11.2 kg (24.6 lb)</li> <li>Line Level (flat)</li>
  7 KB (1,045 words) - 15:04, 12 June 2021
• White Papers
  ...arcus Ryle &mdash; Co-founder & Vice President of Product Development Line 6 Incorporated, <br />Kenneth Jacob &mdash; Chief Engineer & Director Bose Li ...applicable in that context. Please be aware that the {{L1}} is a portable line array. It is twice the height of the MA12 and has different characteristics
  4 KB (651 words) - 13:44, 29 March 2017
• ToneMatch® Cable
  === Convert Cat-5/6/7/8 to Ethercon === ...o run the {{T1}} off of the optional power supply, and then run a balanced line from the Master Out on the {{T1}} to the balanced 'analog input' on the {{M
  5 KB (805 words) - 19:12, 6 June 2021
• T1 ToneMatch Audio Engine Aux Out to S1 Pro system
  The {{T1}} Aux Out is a 1/4 inch (6 mm) Tip-Ring-Sleeve balanced mono output and it is suitable to connect to t ...-Sleeve cable will have up to -6dB lower signal and be more susceptible to line noise.
  659 bytes (111 words) - 22:19, 16 November 2019
• Boss VE-8 to S1 Pro
  ...VE=8 to the {{S1}}. This should be fine for connections up to twenty feet (6 meters). For other scenarios like those listed below, please see the [https # You won't use the S1 Pro Line Out.
  2 KB (248 words) - 22:21, 16 November 2019
• Bose L1 Model II Compared to L1 Pro32
  <li>Mid-High arrays (2) 7.1 kg (15.6 lb)</li> 213.5 × 34.5 × 55 cm (84.1 × 13.6 × 21.7 in)<br />
  11 KB (979 words) - 16:27, 23 September 2023
• Sennheiser EW-D
  *AF Out 6 dB | Gain 39 dB AF Out 6 dB | Gain 39 dB
  5 KB (897 words) - 14:39, 13 April 2022
• B1 Bass Module / Positioning
  ...into a big obstacle, because then the sound can't get out; leave at least 6 inches (15 cm) of space in front of the grille. The side of the box itself ...n face to face, leaving 12 inches (30 cm) between grilles (because this is 6 inches (15 cm) in front of each B1). Sonically, it doesn't matter which wid
  10 KB (1,856 words) - 20:49, 13 July 2021
• Balanced vs Unbalanced
  ...ith Tip-Ring-Sleeve plugs]][[File:14 to xlr male.jpg|thumb|100px|1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR]][[File:14 insert.jpg|thumb|100px|Insert cable *1/4 inch (6.3 mm) Tip-Ring-Sleeve
  8 KB (1,267 words) - 17:43, 7 February 2023
• T1 ToneMatch® Audio Engine / Aux
  ...-Sleeve cable will have up to -6dB lower signal and be more susceptible to line noise. ...d mono intended to be connected to the balanced input of another device at line-level. This may also work with headphones but the volume will be very low a
  5 KB (923 words) - 20:02, 9 July 2018
• Electric Guitar
  [[File:Line 6 Helix.png|link=https://line6.com/helix/|x200px|Line 6 Helix]] ...act}} use Channel 2 &frac14; inch jack with the ToneMatch switch set to ''Line''.
  5 KB (762 words) - 12:12, 1 November 2019
• L1® Model II
  :Line-level analog input accepts 1/4" TRS phone cable. Can be used for instrument *Bass line out
  9 KB (1,440 words) - 01:37, 20 May 2021
• Is the B2 Bass Module Compatible with the L1® Classic or Model I
  ...ttp://toonz.ca/bose/wiki/images/c/c3/Faq_L1_Model1S.pdf Model 1S FAQs page 6]</ref> ...1s connected to the Bass Module Output AND something connected to the Base Line Out.
  7 KB (1,259 words) - 08:44, 26 March 2017
• L1® Timeline
  ...ce a special year end concert at Bose headquarters Monday, December 20, at 6:00 PM. ...ee pound class D amplifier connects seamlessly to an L1® Power Stand Bass Line out and powers up to two B1s.
  21 KB (2,953 words) - 18:18, 16 October 2022
• Phantom Power
  ...rophone cable by a mixer equipped with phantom power or by some type of in-line external source. The voltage is equal on Pin 2 and Pin 3 of a typical balan ** {{T8S}} channels 1, 2, 3, 4, 5, 6, 7, 8
  8 KB (1,252 words) - 19:43, 10 March 2020
• Generators for Portable Power
  ...e compressor shuts off, there may be an excess of energy going through the line causing a significant spike in voltage going to the {{L1}}. Conversely, whe • Numark RM-6 mixer
  6 KB (872 words) - 17:51, 21 August 2021
• T1 ToneMatch® Audio Engine / Connections to Compact
  ...able, but you will lose up to -6 dB in signal strength and you may pick up line noise.
  1 KB (186 words) - 11:48, 30 August 2018
• L1® T1 ToneMatch® Audio Engine / FAQ
  ...edals on the market or use a DSP-based amplifier modeler, such as the Line 6 "Pod" that models the tone produced by amplifier tubes, guitar transducers ...must use a load device, such as a "Plate Soak" or a "Hot Plate" to give a line-level output suitable for the input stage of the T1.
  31 KB (4,908 words) - 04:28, 9 April 2017
• Stereo / Mono / Distributed Systems
  *[[Dual Mono]] - keep the L1s 20 feet (6 meters) apart or more ...rly the Model I and the Model II. Because the I and II are essentially 14' line arrays (7' speaker with a 7' mirror image source created by the floor refle
  8 KB (1,432 words) - 15:37, 23 September 2023

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)