Difference between revisions of "T4S Connection to L1 Model I"
(Created page with "{{Classic icon}}{{T4S icon}} You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a T1®. You'll need a T1 ToneMatch® Audio Engine power supply|...") |
m (format images) |
||
| Line 6: | Line 6: | ||
You've got two ways to handle this: | You've got two ways to handle this: | ||
| − | #Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)<br><br>[[File:T4S Analog Right Output.png]]<br>[[File:L1 Model I Channel 3 Input.png]] | + | #Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)<br><br>[[File:T4S Analog Right Output.png]]<br>[[File:L1 Model I Channel 3 Input.png|800]]<br>OR<br> |
| − | <br>OR<br> | ||
#Leave your inputs panned to center (the default setting), and connect | #Leave your inputs panned to center (the default setting), and connect | ||
#*T4S Left output to the L1® Classic Channel 3<br>try setting the level to about 4 | #*T4S Left output to the L1® Classic Channel 3<br>try setting the level to about 4 | ||
#*T4S Right output to the L1® Classic Channel 4<br>try setting the level to about 4 | #*T4S Right output to the L1® Classic Channel 4<br>try setting the level to about 4 | ||
| − | + | <br>[[File:T4S Analog Outputs.png]]<br>[[File:L1 Model I Channel 34 Inputs.png|800]] | |
Revision as of 14:56, 21 April 2018
You can connect the T4S ToneMatch mixer to the L1 Classic or L1 Model I, just as you would a T1®. You'll need a ToneMatch Power Supply
There's a slight difference because there are two 1/4 inch (6mm) output jacks on the T4S for Left and Right Outputs.
You've got two ways to handle this:
- Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)
OR - Leave your inputs panned to center (the default setting), and connect
- T4S Left output to the L1® Classic Channel 3
try setting the level to about 4 - T4S Right output to the L1® Classic Channel 4
try setting the level to about 4
- T4S Left output to the L1® Classic Channel 3
When using a T1® or T4S with the L1® Classic, you don't need to use the R1 Remote.