Template:ToneMatch Mixer to F1 Model 812 XLR Connection

From Bose Portable PA Encyclopedia
Revision as of 10:17, 29 July 2018 by ST (talk | contribs) (Created page with " Connecting the T4S/T8S via Analog Connection # Make sure the device you are connecting to and the T4S/T8S are powered off and the T4S/T8S Master volume control is set to mini...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Connecting the T4S/T8S via Analog Connection

  1. Make sure the device you are connecting to and the T4S/T8S are powered off and the T4S/T8S Master volume control is set to minimum.
  2. Using XLR balanced cables, connect one or two devices to the XLR Stereo Outputs of your T8S (see Figure 10).
    • Note: The T4S/T8S can be connected to a device via the Analog R Output port using a 1/4" TRS cable (sold separately). Plug the other end of the TRS cable into the Analog Input port of the device. To connect the T4S/T8S to two devices, connect a second device to the Analog L Output port on the T4S/T8S using a 1/4" TRS cable.
  3. Connect a ToneMatch* power supply to the Power port of the T4S/T8S and plug it into a live AC outlet. Refer to “Connecting the ToneMatch’ Power Supply” on page 14.
  4. Turn on the T4S/T8S mixer and then turn on the device.
  5. Connect your instruments and adjust levels. Refer to “Optimizing Input Gain and Output Volume” on page 17.


T8S to F1 Model 812.png

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:ToneMatch_Mixer_to_F1_Model_812_XLR_Connection&oldid=19747"