Search results
Create the page "ToneMatch Mixer" on this wiki! See also the search results found.
Page title matches
- 682 bytes (115 words) - 03:41, 23 August 2019
- ...d that I'm discussing in the recording, but follow along on your ToneMatch mixer, and you'll be able to hear them in your environment. ...sound still needs some help the use the ParaEQ to solve problems. See [[T1 ToneMatch® Audio Engine / Para EQ|ParaEQ]] for details.3 KB (446 words) - 00:54, 4 July 2023
- {{ToneMatch Mixer Gain Staging and ToneMatch Preset}}53 bytes (7 words) - 11:34, 23 August 2018
- Connect a third party mixer with left and right outputs to your {{ToneMatch Mixer}}. You can use two of the main channels ({{T4S}} channels 1, 2, 3, 4 or {{ If you connect the third party mixer to the main channels you can use:1 KB (205 words) - 06:33, 2 December 2018
- ...are familiar with the frustration with using the fixed tone controls on a mixer when the controls don't match the voice or instrument that's being equalize ...a technology that's made possible by ToneMatch technology. When you select ToneMatch preset, they are helping to identify the instrument they are using (or in t7 KB (1,211 words) - 15:42, 9 December 2019
- ...ld you or should you not use a ToneMatch preset when using the {{ToneMatch Mixer}} or {{T1}} with other systems?''' ...when used with an {{L1}} system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems.2 KB (379 words) - 11:08, 10 December 2023
- You can save all your ToneMatch Mixer settings as a Scene. Think of it as a snapshot. You can have up to te {{:T1 ToneMatch® Audio Engine / Scenes Documentation}}1 KB (222 words) - 16:11, 18 April 2023
- ;Note: To use the {{T4S}} with an {{S1}} you need a [[ToneMatch Power Supply]] unless you are also connected to an {{Model 1S}} or {{Model [[File:ToneMatch Power Supply Connection.png|400px|link=ToneMatch Power Supply]]3 KB (510 words) - 17:52, 2 May 2022
- 3 KB (525 words) - 13:15, 8 April 2018
- #REDIRECT [[T1® ToneMatch Mixer Reverb]]41 bytes (5 words) - 13:15, 8 April 2018
- 62 bytes (9 words) - 21:27, 16 April 2018
- Here's a quick overview of how you can connect a {{ToneMatch Mixer}} to an S1 Pro #Leave the {{ToneMatch Mixer}} and S1 Pro turned off until you have things connected1 KB (240 words) - 22:55, 22 October 2018
- {{ToneMatch Mixer Presets As Shipped}}38 bytes (5 words) - 11:10, 28 December 2018
- <td valign="top">[[Image:T1 Channel 45 mixer.jpg|400px]] Use 1/4 inch (6.3mm) Tip-Ring-Sleeve cables or if your mixer has XLR outputs use an XLR to 1/4" (6.3mm) Tip-Ring-Sleeve cables.3 KB (527 words) - 08:57, 26 November 2022
- Connect a ToneMatch mixer to a Mackie SRM series loudspeaker [[File:Mackie SRM 350 input from ToneMatch Mixer.jpg|800px]]820 bytes (122 words) - 07:41, 6 January 2019
- ...ch-mixer How are you using the Artistic Expression tools in your ToneMatch Mixer] ...ch-mixer How are you using the Artistic Expression tools in your ToneMatch Mixer]2 KB (311 words) - 13:34, 21 January 2019
- |Device= [[T4S/T8S ToneMatch® Mixer|T8S ToneMatch Mixer]] ...e [https://www.bosepro.community/g/portable/topic/connecting-T8S-tonematch-mixer-to-bose-s1-pro?reply=35372794827754454#35372794827754454 Bose Portable PA C2 KB (427 words) - 01:52, 13 August 2021
- <li>Set the ToneMatch switch to OFF</li> |Device= [[T4S/T8S ToneMatch® Mixer|T8S ToneMatch Mixer]]3 KB (517 words) - 17:00, 4 January 2024
- ;How do I set up a powered monitor with my {{T4S}} and an L1 with at ToneMatch Port? ({{Model II}} or {{Model 1S}} or {{L1 Pro System}})? If you have connected the L1 to ToneMatch Port <br> connect your monitor to the Main Right Output<br>[[File:T4S Monit2 KB (421 words) - 15:59, 24 December 2023
- ;Answer: Yes. On the {{T1}} use the Preamp Output. On the {{ToneMatch Mixer}} use one of the Aux Outputs.3 KB (474 words) - 13:59, 23 April 2019
- 55 bytes (13 words) - 11:39, 23 May 2019
- {{ToneMatch Mixer No Reverb on Aux}}72 bytes (14 words) - 13:29, 2 June 2019
- ...d to be used between the output of your acoustic guitar and the input of a mixer or PA system. With the T4S settings set to FLAT/Bypass follow the instructi [[File:T4S T8S Phantom On.jpg.jpg|thumb|ToneMatch Mixer Phantom Power]]4 KB (656 words) - 15:13, 3 February 2020
- 297 bytes (31 words) - 02:09, 14 January 2021
- {{:T1 ToneMatch® Audio Engine / Bypass}}41 bytes (5 words) - 21:56, 14 November 2023
Page text matches
- [[Image:T150.png|right|T1 ToneMatch® Audio Engine]] ...already own an {{L1}} Model I (or Model II) system. Can I purchase the T1 ToneMatch audio engine separately and use it with the system? ===31 KB (4,908 words) - 04:28, 9 April 2017
- {{T4S/T8S ToneMatch Mixer Owners Guide}} ...://global.bose.com/en_us/product_registration.html Register your ToneMatch mixer]9 KB (1,484 words) - 23:55, 13 December 2023
- ...download these, you have all the files you need to do the update process: ToneMatch Updater software, instructions, and the Firmware file (*.bos) [[Media:ToneMatch_Updater-Windows_1.1.5.zip|ToneMatch Updater for Windows with firmware version 1.1.5]]<br>Contains updater and f12 KB (1,725 words) - 19:23, 6 August 2023
- ==Can I use a powered mixer?== ...outputs'' from a powered mixer to any Bose Portable PA equipment including ToneMatch mixers and powered loudspeakers (L1, F1, S1 Pro)4 KB (664 words) - 22:22, 16 November 2019
- {{ToneMatch icon}} ...Mixer to allow more than one input per {{S1}} channel to use [[ToneMatch®|ToneMatch® Presets]].3 KB (485 words) - 22:23, 16 November 2019
- {{ToneMatch icon}} ...ixer to allow more than one input per Compact channel to use [[ToneMatch®|ToneMatch® Presets]].3 KB (457 words) - 15:16, 28 December 2012
- === ToneMatch Mixer === ...r to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different enviro24 KB (3,721 words) - 12:54, 8 August 2023
- |RightHead = Connect a Mixer to an L1 Pro ;For best results: Connect the output(s) of a mixer to the line-level inputs of the L1 Pro. These are the 1/4-inch (6.3 mm) Tip4 KB (677 words) - 00:26, 29 February 2024
- === What exactly are ToneMatch® presets and what are the benefits of using them? === ...simple as plugging in your instrument or mic and selecting the appropriate ToneMatch preset.60 KB (9,859 words) - 05:33, 26 March 2017
- [[Image:ToneMatchLogo.png|right|ToneMatch® Logo]] === Installing {{ToneMatch no link}} Preset Banks ===7 KB (1,019 words) - 17:46, 2 September 2022
- This article assumes that the reader is familiar with the L1 and ToneMatch mixer, but has to rely on others to operate it. === With a ToneMatch Mixer (T1, T4S/T8S) ===2 KB (300 words) - 16:59, 18 April 2023
- Here's a quick overview of how you can connect a {{ToneMatch Mixer}} to an S1 Pro #Leave the {{ToneMatch Mixer}} and S1 Pro turned off until you have things connected1 KB (240 words) - 22:55, 22 October 2018
- This article applies to a T4S ToneMatch Mixer connecting to an L1 Pro (any model). ...the controls of the L1 Pro is the same whether a T4S is connected via the ToneMatch port2 KB (379 words) - 13:41, 7 August 2023
- ...Connect the {{L1P}} ToneMatch port to the {{T1}} ToneMatch port using the ToneMatch cable #***Turn off the ToneMatch Preset3 KB (441 words) - 20:35, 8 December 2021
- {{ToneMatch icon}} ...is about using a Mixer to allow more than two inputs to use [[ToneMatch®|ToneMatch® Presets]].3 KB (463 words) - 15:12, 28 December 2012
- </td>Connect your ToneMatch Mixer to an S1 Pro System [[File:S1 Pro with ToneMatch Mixers.png]]740 bytes (132 words) - 22:24, 16 November 2019
- ...T1}} or {{ToneMatch Mixer}}) to the maximum you can without clipping. On a mixer this may be shown as unity or 0. ==== Stereo + Mixer ====20 KB (3,211 words) - 12:46, 29 September 2023
- ...{{Jackery 500}} to run L1 Pro (various) and {{Model II}} with {{ToneMatch Mixer}}, two B1 bass modules, and [https://www.kemper-amps.com/stage Kemper Stage ...r at least five hours for an L1 Pro or L1 Legacy system with a {{ToneMatch Mixer}}.56 KB (6,401 words) - 10:35, 11 February 2024
- ==== ToneMatch Mixer ==== ...e a separate monitor mix in the ToneMatch mixer, and connect the ToneMatch Mixer Aux Output to the S1 Pro.1 KB (220 words) - 15:17, 14 February 2020
- <td valign="top">[[Image:T1 Channel 45 mixer.jpg|400px]] Use 1/4 inch (6.3mm) Tip-Ring-Sleeve cables or if your mixer has XLR outputs use an XLR to 1/4" (6.3mm) Tip-Ring-Sleeve cables.3 KB (527 words) - 08:57, 26 November 2022
- == Third Party Mixer to ToneMatch Mixer (T4S/T8S) == {{:Mixer to ToneMatch Mixer}}5 KB (788 words) - 06:27, 2 December 2018
- {{ToneMatch Mixer Gain Staging and ToneMatch Preset}} The {{ToneMatch Mixer}} trim controls for Channels 1-4 (1-8 for the {{T8S}}) provide a significan16 KB (2,433 words) - 20:03, 1 July 2023
- ==== Mixer ==== The mixer is2 KB (266 words) - 12:47, 22 November 2019
- <p>This is software in the physical device (e.g. S1 Pro, ToneMatch Mixer, L1® Power Stand). </p> <p>For ToneMatch Mixers and L1® products firmware updates can be downloaded and installed u4 KB (647 words) - 22:00, 10 February 2020
- The {{ToneMatch Mixer}} Aux inputs do not have trim controls or LEDs. How do I set the input leve ...nput source. You can control the volume at the source, or the {{ToneMatch Mixer}} Master Volume control.2 KB (374 words) - 17:38, 2 December 2018
- Integrated ToneMatch® presets contain hardwired equalization curves for dynamic handheld microp {{:T1 ToneMatch® Audio Engine to Compact}}27 KB (4,306 words) - 01:35, 20 May 2021
- ...ld you or should you not use a ToneMatch preset when using the {{ToneMatch Mixer}} or {{T1}} with other systems?''' ...when used with an {{L1}} system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems.2 KB (379 words) - 11:08, 10 December 2023
- ...<br>This would make it easy to connect a T1 ToneMatch mixer. The ToneMatch mixer resolves all three points above. ...d reverb. With the L1 Mix app, I can use the same ToneMatch Presets as the ToneMatch mixers (T1/T4S/T8S).5 KB (829 words) - 18:18, 30 November 2021
- ...ffers three mic/line inputs, two line inputs (L/R), our largest library of ToneMatch presets, proprietary zEQ and a complete suite of studio-class effects and p ...thod for setting the gain on a Model II power stand when connected to a T1 ToneMatch audio engine? ===42 KB (6,832 words) - 05:25, 26 March 2017
- Connect a ToneMatch mixer to a Mackie SRM series loudspeaker [[File:Mackie SRM 350 input from ToneMatch Mixer.jpg|800px]]820 bytes (122 words) - 07:41, 6 January 2019
- ...ch-mixer How are you using the Artistic Expression tools in your ToneMatch Mixer] ...ch-mixer How are you using the Artistic Expression tools in your ToneMatch Mixer]2 KB (311 words) - 13:34, 21 January 2019
- ...d to be used between the output of your acoustic guitar and the input of a mixer or PA system. With the T4S settings set to FLAT/Bypass follow the instructi [[File:T4S T8S Phantom On.jpg.jpg|thumb|ToneMatch Mixer Phantom Power]]4 KB (656 words) - 15:13, 3 February 2020
- ===Using the ToneMatch Mixer and the [[ToneMatch Updater]] to backup your scenes ===1 KB (153 words) - 16:17, 18 April 2023
- This is an overview of how you can connect a third party mixer to an L1 as the main output and {{S1}} as a monitor. You can connect using the XLR outputs from a mixer.2 KB (357 words) - 22:23, 16 November 2019
- ;Note: The {{ToneMatch Mixers}} are compatible with the {{L1PS}}s (announced October 2020). ** T4S: Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve3 KB (453 words) - 01:38, 17 May 2021
- === ToneMatch® Port === [[Image:ModelIIToneMatchPort.png|ToneMatch® Port on the Model II]]9 KB (1,440 words) - 01:37, 20 May 2021
- === ToneMatch® Port === [[Image:Model1SToneMatchPort.png|ToneMatch® Port on the Model 1S]]8 KB (1,264 words) - 01:56, 20 May 2021
- #REDIRECT [[T4S/T8S ToneMatch® Mixer Firmware Updates]] These instructions describe how to update the firmware of your ToneMatch® mixer.1 KB (261 words) - 17:15, 26 April 2018
- Connect a third party mixer with left and right outputs to your {{ToneMatch Mixer}}. You can use two of the main channels ({{T4S}} channels 1, 2, 3, 4 or {{ If you connect the third party mixer to the main channels you can use:1 KB (205 words) - 06:33, 2 December 2018
- * Yamaha Mixer * A very personal take on ToneMatch technology (Ken)23 KB (3,572 words) - 14:20, 19 March 2008
- ...veling down. Thus, the microphone is receiving the power remotely from the mixer. ...element itself. This voltage is supplied through the microphone cable by a mixer equipped with phantom power or by some type of in-line external source. The8 KB (1,252 words) - 19:43, 10 March 2020
- ...that signal, compared to a higher input signal (e.g., microphone through a mixer or wireless receiver or a guitar with a built-in preamp). ...hat point is may not be 12:00 o'clock. It will depend on the output of the mixer.6 KB (1,007 words) - 15:34, 14 June 2020
- ...s/portable_amplification_systems/accessories/l1_tonematch_acc.jsp Bose T1 ToneMatch Audio Engine] === * Digital multichannel mixer designed for use with Bose® L1® sound systems10 KB (1,768 words) - 14:28, 11 March 2019
- <td>ToneMatch® Presets Use a ToneMatch mixer to have access to ToneMatch Presets.11 KB (856 words) - 21:13, 11 June 2021
- ...are familiar with the frustration with using the fixed tone controls on a mixer when the controls don't match the voice or instrument that's being equalize ...a technology that's made possible by ToneMatch technology. When you select ToneMatch preset, they are helping to identify the instrument they are using (or in t7 KB (1,211 words) - 15:42, 9 December 2019
- == ToneMatch Mixer ==3 KB (546 words) - 18:49, 22 January 2019
- ...eople have expressed concern because the T8S ToneMatch mixer does not have ToneMatch (digital) connections to L1 Model 1S and L1 Model II. ''We tried to make it (full ToneMatch port for digital output) happen for the T8S but powering the T8S from an L13 KB (541 words) - 11:02, 28 February 2018
- ;What ToneMatch Presets should I use with my Guitar Modeler (AXE FX, Line 6, Kemper, or sim There are several ToneMatch Presets to consider.1 KB (232 words) - 13:20, 22 September 2018
- On the ToneMatch mixers (and many others) there are three controls that affect the volume ToneMatch mixers accept inputs from various sources from very low output devices (lik3 KB (508 words) - 06:27, 22 December 2018
- Source: {{T4S/T8S ToneMatch Mixer Owners Guide}} ...f you don't have two ToneMatch cables, follow this link for alternatives.[[ToneMatch Cable]]577 bytes (100 words) - 00:08, 23 December 2023